|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Corsa C 1.0 12v wont go in reverse » Post Reply
|
Adam_B |
posted on 4th Jul 09 at 17:31 |
Got the new linkage, looks the same as the old one though :| | |
Joe |
posted on 4th Jul 09 at 16:23 |
Yeah common problem, its £40ish from vaux for the new bit. | |
Rich H |
posted on 4th Jul 09 at 13:19 |
Yeh pretty sure the plastic linkages were replaced with uprated metal ones. Mine's post facelift so had the uprated one anyway so not totally clued up on the differences. | |
Adam_B |
posted on 1st Jul 09 at 19:05 |
Ok i had a look and the plastic top bar bit on the linkage had just popped off. Is this the bit that was re-called? It didnt seem to be a particularly good fit so im going to get a new one from Vaux tomorrow. | |
Rich H |
posted on 1st Jul 09 at 18:08 |
Has it had the gear linkage replaced as they were recalled a few years back. May be that? :boggle: | |
Adam_B |
posted on 1st Jul 09 at 17:31 |
Any ideas? Im going to look at it in a bit but wondered if there were any common things to look at first? All i know is the collar lifts up fine but the stick wont move into position. |