|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Offset of BK wheels » Post Reply
|
cosy_one |
posted on 20th Feb 03 at 13:14 |
17's will required arch rolling/cutting at the rear on a 40mm drop. | |
Danny P |
posted on 20th Feb 03 at 12:57 |
Cheers, anyone else? | |
Red_SXi |
posted on 20th Feb 03 at 12:44 |
Maybe a bit, i'm not an expert, more work on a corsa B, you might get away without any work on a Corsa C, i'm not too sure | |
Danny P |
posted on 20th Feb 03 at 12:37 |
ok cheers, looks like the centrer cap will be removed then when it gets lowered. | |
Red_SXi |
posted on 20th Feb 03 at 12:29 |
Yes, i'd of thouth because they stick out 5mm more, it make them effectively ET40 | |
Danny P |
posted on 20th Feb 03 at 12:11 |
BTW, if i have 5mm spacers, does this mean the offset has effectivly been changed?? | |
SteveW |
posted on 20th Feb 03 at 12:05 |
I just got a set of 322's once again they needed spacers. But nearly every alloy does need them, i think. | |
Red_SXi |
posted on 20th Feb 03 at 11:47 |
Why is that Danny P | |
Danny P |
posted on 20th Feb 03 at 11:36 |
Ive Got BK 238's on mine in 17's. Think they are et45, but i have had to put 5mil spacers on them to allow the centre cap to fit on. | |
MC Kustoms |
posted on 20th Feb 03 at 11:32 |
iv got bk299's in 18s i was up whit lion last night | |
Red_SXi |
posted on 20th Feb 03 at 11:30 |
Good, what are the quality of BK wheels like? and has anyone ever heard of Federal tyres? | |
MC Kustoms |
posted on 20th Feb 03 at 11:15 |
they are et 45 | |
Red_SXi |
posted on 20th Feb 03 at 11:13 |
Hi Guys, |