|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Quick Ignition Question! » Post Reply
|
Terry12 |
posted on 16th Jun 09 at 07:53 |
Yup turn it to position one and I found using an allen key perfect for poking into the hole. | |
wacwac86 |
posted on 15th Jun 09 at 23:47 |
its 1 had to take mine out and you need to poke a little nail or something simmilar into a hole to release the barrell | |
Terry12 |
posted on 15th Jun 09 at 14:13 |
quote: You're going to need to turn the key to position 1 or 2 to be able to remove the old barrel. I can't remember if it's 1 or 2. | |
shauny bizzle |
posted on 15th Jun 09 at 01:25 |
split the key yaself and swap the lil black chip into ur new fresh key | |
NORRIS-07 |
posted on 14th Jun 09 at 23:04 |
oo right ok thanks, nope i cant turn the key in the ignition, where can i get the chips swapped? | |
DaveyLC |
posted on 14th Jun 09 at 21:34 |
The transponder/reader isnt part of the barrel, it just comes off, only bit you need to change is you'll need to transfer the chip to the new key. | |
Terry12 |
posted on 14th Jun 09 at 19:21 |
If changing the ignition barrel then no, It's a straight swap. | |
NORRIS-07 |
posted on 14th Jun 09 at 11:34 |
need to ask a quick question, ive broken my ignition by snapping the key in the barrel, going to buy another one but will i also need to change the ecu and the black transponder/immobiliser block thing aswell ? |