|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » look ECU look **-**** » Post Reply
|
ripley |
posted on 20th Jun 09 at 15:20 |
when i said i had sorted it!! thats a big fat NO. right the ecu pin outs 1 to 55 do not match up to the astra/cav or calibra books under x20xev simtec 56.5?? , in my astra book my pin outs come under the 1.8xe ecu simtec 56 and there is no bl/rt on this pin 5. on this pin out the weg is on pin 29 and when i tone this pin out it comes out in the multi plug in the foot well so i have spliced the signel from my gearbox plug and the car will not start the ecu light is flashing all the time, so take the wire off and it starts?? i thought the bl/rt in foot well was abs pick up? this is so doin my head in......on a good note my v5 came back with the engine change. lol. 8 weeks later..........any more help would be fab | |
AlexW |
posted on 11th Jun 09 at 14:56 |
Is the ECU connected to the VSS then? Being 8v or 16v shouldnt matter. | |
ripley |
posted on 10th Jun 09 at 22:23 |
sorry forgot to say the engine is out of an 95 cav x20xev and the ecu is simtec 56.1 | |
ripley |
posted on 10th Jun 09 at 22:17 |
Here is the video | |
ripley |
posted on 10th Jun 09 at 22:03 |
Hi all ecu light came up last night when on a test run?? So I did a paper clip test and this is what came up, I will post a video in a minute of the flashing light, just let me know if I have done this right and how to sort the code 24 out. As you can see I have a digi dash its an 8v one but iam not sure what the transponder is off an 8v or 16v. any help thanks |