me dads m8 is makin me 1

Where you haveing a custom made one from DanielJ? Can't find any to match my Ripspeed gear knob. They're either Chrome or Titanium.

mine wudnt come off with a hammer.
i used the good old hacksaw again.
GREAT fun
my richbrook handbrake handle is a perfect fit

This is perhaps common sense but its free advice anyway - if you fit a metal or alu handle, hammer it on with a RUBBBER hammer!

I've fitted a steinmetz handbrake handle and it fits really tight, and has got 2 grub screws underneath it for extra grip - but Id expect that for £65!

i ad 2 cut mine off, i got tha richbrook handle but it dun fit 2 good so im avin a custom 1 on the weekend :D

I used a large spanner - put it behind the hand brake and whack the spanner several times with a hammer. It's a tight fit. You might get a better angle at doing this by sitting on the back seat.

Rich

As i thought. cheers. is it just me but to remove anything in a corsa you cna use 2 methods:
1. heat witha hair dryer and twist
2.Use a hammer and screw driver.

If it won't twist off, get a hammer and screwdriver and hit it off from behind, if this fails, get the ever so popular hacksaw out.

Tip: may be easier heating it up with a hairdryer, this is what i heard.

oh come on guy and girls? you must have changed your hand brake handles? even any of the moderators would know!

I know probably boring to you guys but i got me a richbrook silver handle and need to know how to get the original off? Is it a heat and twist job or is there another way?:o:o:o