|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Tie bar bush removal 1999 brackets » Post Reply
|
john_c20xe |
posted on 8th Apr 09 at 14:57 |
yeh use something big to push the whole lot out. or use breakcleaner and a lighter | |
Rick Draper |
posted on 8th Apr 09 at 14:44 |
Warren when you say the whole thing do you mean the metal piece the bush seems to sit in as well? | |
Rick Draper |
posted on 6th Apr 09 at 22:17 |
Cheers. | |
Warren G |
posted on 6th Apr 09 at 20:47 |
i pushed the whole thing out, just to find i had the wrong poly bushes | |
J200RSA |
posted on 6th Apr 09 at 20:41 |
find i socket the same size as the middle part and put it in a vice, tighten the vice and the socket will push the bush out, thats how i did mine | |
fazza |
posted on 6th Apr 09 at 20:36 |
yeh cant u drill like this red bits for example | |
Rick Draper |
posted on 6th Apr 09 at 20:13 |
What the centre metal piece before the rubber or the rubber bit itself? Never seen a vauxhall bush like these. | |
fazza |
posted on 6th Apr 09 at 20:08 |
just drill around the centre circle and then smash out the centre? | |
Rick Draper |
posted on 6th Apr 09 at 20:07 |
| |
Rick Draper |
posted on 6th Apr 09 at 19:44 |
Mine is a club shell. Will get some pics of them now | |
fazza |
posted on 6th Apr 09 at 15:55 |
wasnt aware they were different but drilled about 7 holes on my (95 gsi) and then smacked them out or used a blowtorch until the rubber sets fire and then smacking out | |
mac1976 |
posted on 6th Apr 09 at 15:50 |
is yours a sxi shell rick | |
Rick Draper |
posted on 5th Apr 09 at 22:59 |
How do i remove the tie bar bushes from a 1999 tie bar bracket. Usually i just cut one half of the bush then smack them out but these seem totally different. |