corsasport.co.uk
  Not logged in [Login - Register]  
You Are Not Registered Or Not Logged In  

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » ignition earth » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help
Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

Sean-B

 posted on 6th Apr 09 at 12:55

quote:
Originally posted by Ste W
Yeah just like star trek :look:

It is for EMP shielding for the PIP/SAW signal and from the VR sensor.


:(:( i had visions of you ordering 'shields up' then ploughing through a fence


Ste

 posted on 6th Apr 09 at 12:48

Yeah just like star trek :look:

It is for EMP shielding for the PIP/SAW signal and from the VR sensor.


Sean-B

 posted on 6th Apr 09 at 07:31

quote:
Originally posted by Ste W
My kit car has a megajolt and I have wired it up correctly and it runs perfect.

You DO NOT need a switched earth.

pin 1 is your PIP
pin 3 SAW
5 & 6 go to VR sensor
7 is for the shields
8 is switched LIVE(+)
9 is earth (not switched)
10 & 12 go to coil pack.

Ensure you use good quality shielded cable for trigger sensor (VR) and the PIP & SAW to the megajolt.


like in star trek:!


Ste

 posted on 6th Apr 09 at 00:51

My kit car has a megajolt and I have wired it up correctly and it runs perfect.

You DO NOT need a switched earth.

pin 1 is your PIP
pin 3 SAW
5 & 6 go to VR sensor
7 is for the shields
8 is switched LIVE(+)
9 is earth (not switched)
10 & 12 go to coil pack.

Ensure you use good quality shielded cable for trigger sensor (VR) and the PIP & SAW to the megajolt.


aaronc190

 posted on 5th Apr 09 at 19:58

no it wat the diagram says?..what would happin if i put a normal earth on it?


john_c20xe

 posted on 5th Apr 09 at 10:46

hmm not to sure really do you know why it needs a switch earth?


aaronc190

 posted on 5th Apr 09 at 10:29

but for the megajolt it needs to be switched,does any one no how to do this throught a relay?..i no how to get a normal earth


Ian

 posted on 5th Apr 09 at 01:09

Generally earths are not switched. If it's an earth you need, do as Ste says.


john_c20xe

 posted on 5th Apr 09 at 00:27

you mean a switch live?


aaronc190

 posted on 4th Apr 09 at 21:44

no it needs to be an ignition earth..when i switch on the ignition i need an earth going to the edis module?


Ste

 posted on 4th Apr 09 at 21:11

Anywhere on the chassis. Clean up a bit of the steel near where you are mounting it and screw the earth on there.


aaronc190

 posted on 4th Apr 09 at 20:57

i need an ignition earth to get me megajolt running..were on the car can i get this from??