|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » oil pressure gauge help » Post Reply
|
Olsrey |
posted on 13th Feb 09 at 09:41 |
quote:Wire the calibra gauge sensor wire to the terminal on the pressure sender which you can screw a nut onto. | |
george |
posted on 12th Feb 09 at 19:33 |
its a redtop corsa. ive got one of them oil pressure switches on mine. | |
Olsrey |
posted on 11th Feb 09 at 16:58 |
Ah thats why then :thumbs: | |
DaveyLC |
posted on 11th Feb 09 at 16:56 |
Yeah some of the MK1 novas had an oil pressure gauge :D | |
Olsrey |
posted on 11th Feb 09 at 15:38 |
quote:Strangely, EPC reckons they came on some Novas, Frontera 2.0, 2.2, 2.4, 2.3 & 2.5 diesel, Carlton 3.0, Senator 2.6 & 3.0 and Astras and Calibras. [Edited on 11-02-2009 by Olsrey] | |
DaveyLC |
posted on 11th Feb 09 at 14:25 |
^^thats what you need.. Same as the Carlton GSi/Frontera 2.4.. | |
Olsrey |
posted on 11th Feb 09 at 13:22 |
One from a calibra | |
FruitBooTeR |
posted on 11th Feb 09 at 10:05 |
What engine you got in corsa? | |
DaveyLC |
posted on 11th Feb 09 at 09:36 |
On a 2.0 it will be low down on the block near the oil pump.. Should be pretty large compared to a normal oil pressure switch. | |
george |
posted on 10th Feb 09 at 22:26 |
where will the sender be? | |
DaveyLC |
posted on 10th Feb 09 at 22:00 |
Yes you can but you'll need the oil pressure sender/switch.. The one on the calibra with the guage should have pins for the pressure gauge and the light on the dash. | |
george |
posted on 10th Feb 09 at 21:52 |
is there any way possible i can wire an oil pressure gauge and volt gauge from a calibra into a corsa? if so how as i want the oil pressure gauge |