|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » overfueling let? » Post Reply
|
sam_jam |
posted on 28th Jan 09 at 17:49 |
just changed the coolent temp sensor and earthed the alternator properly and everything seems to be running fine now...ill get some pics up once the car is complete soon thanks all | |
DaveB |
posted on 28th Jan 09 at 12:38 |
If the EML stays on; read the codes off! | |
sam_jam |
posted on 28th Jan 09 at 12:16 |
the EML dose stay on and sometimes the car will run on 3 cylinders then on 4 and will keep swhiching after i swhich the car off and take the plugs out they will be wet through with fuel aswell | |
Olsrey |
posted on 27th Jan 09 at 19:49 |
quote:Yeah mine said the exact same :thumbs: | |
luke85 |
posted on 27th Jan 09 at 19:40 |
quote: Yeah I can confirm that, was told by my engine tuner that its best left not plumbed in because when it fails it can reduce your fuel pressure and its only used when starting the engine from horrendous temperatures (120 degrees plus) Ran mine for years with it connected electrically but not plumbed in with no problems. Have you tried driving the car yet? are there any other synptoms? | |
Olsrey |
posted on 27th Jan 09 at 19:33 |
As far as I'm aware you need the hot start valve wired up but nothing piped up to it mate. Although I think that just stops the EML coming on. | |
DaveB |
posted on 27th Jan 09 at 17:23 |
coolant temperature sensor maybe? | |
sam_jam |
posted on 27th Jan 09 at 17:01 |
hi all just fitted a Let into my corsa B all piped up and wired up properly.......the problem im having is that after i start it and leave it to run for a few mins it wont start again for a few hours. i have changed manythings like plugs leads fuel relay idle control valve only thing i dont have connected is the hot start valve which i dont no if you need when i go to start the car after swhiching it off all i can smell is petrol and it wont fire up |