corsasport.co.uk
  Not logged in [Login - Register]  
You Are Not Registered Or Not Logged In  

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » corsa transpant wireing » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help
Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

sxi-kid

 posted on 28th Sep 08 at 13:12

sounds pretty straight forward to be honest, would i be able 2 use the gear box off the 1.2 16v?

[Edited on 28-09-2008 by sxi-kid]


Rybo

 posted on 26th Sep 08 at 00:21

quote:
Originally posted by andyc1234
and the green one for the rev counter


and blue is your temp gage
im sure on the nova theres a brown/yellow for em light too

on the nova engine loom there is a 6 pin plug with the 6 wires mentioned above..you may/maynot have to extend them to where your 1.2 ecu was,
should be a pretty straight foreward swap to be honest
when you take the corsa engine out take the little wiring loom off your starter loom/alternator that goes to your battery etc and put it on the 1.6 before you put it in (like you would on a redtop etc)

and you need a water bottle with just the one outlet at the top (not sure if yours has or hasnt got one)


andyc1234

 posted on 25th Sep 08 at 19:28

makes it easier really as the nova ecu is in the bay as well.


sxi-kid

 posted on 25th Sep 08 at 19:04

does that make it easier or harder te ecu being there?


ainsley_brader

 posted on 24th Sep 08 at 20:20

quote:
Originally posted by markb1234
is the wireing not different on a 1.2 16v?? same as the 1.0 12v?


yes as the ecu is on the engine not in the footwell!


andyc1234

 posted on 23rd Sep 08 at 23:36

and the green one for the rev counter


andyc1234

 posted on 23rd Sep 08 at 23:35

only 4 wires coming from the nova ecu. red one goes to 12v supply. black goes to ign on. red/blue is fuel pump and then the earth from anywhere on the engine


sxi-kid

 posted on 23rd Sep 08 at 22:59

not sure at all m8


Mark B

 posted on 23rd Sep 08 at 22:11

is the wireing not different on a 1.2 16v?? same as the 1.0 12v?


Adam-D

 posted on 23rd Sep 08 at 20:39

the main harness is the same, the dial plug loom you will have to make, matcha nd extend wire for wire the 9 pin plug from the nova ecu to the plug in your footwell


sxi-kid

 posted on 23rd Sep 08 at 20:13

any luck yet mate?:)


James_H

 posted on 23rd Sep 08 at 19:30

Ah i see, but that sounds a beast.

Will have a look if i can get one.


sxi-kid

 posted on 23rd Sep 08 at 19:29

its got piper cams, venier adjustable pullys , lightened flywheel . boost valve , only got 70,000 and its only 100 of a mate so a lot easier:D could any do me a diagram of some sort please:thumbs:


James_H

 posted on 23rd Sep 08 at 19:24

Easy, only a few wires to connect.

Why not get a c16xe? one for sale on here.


sxi-kid

 posted on 23rd Sep 08 at 19:23

i have a 1.2 16v sxi corsa b and i have a 1.6 gsi 8v from a nova would it be hard to put in and can someone please help me with the wireing please :thumbs: