|
|
|
Not logged in [Login - Register] |
 |
You Are Not Registered Or Not Logged In |
|  |
|
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » engine mount bolts snapped » Post Reply
|
| sumner2k3 |
posted on 15th Aug 08 at 17:33 |
done it now.. drilled it with a titanium bit from halfords and some easy outs lol | |
| rikkgti |
posted on 15th Aug 08 at 14:57 |
how far is it sat inside can u not get a hammer and small punch and work it out by hitting it back out? | |
| sumner2k3 |
posted on 15th Aug 08 at 14:23 |
could i drill a small hole through the middle then use easy outs to get it out? | |
| B3KAN |
posted on 15th Aug 08 at 14:20 |
quote: Best offf taking it to a pro then incase you damage the block | |
| sumner2k3 |
posted on 15th Aug 08 at 14:18 |
wouldnt want to have a go at drilling it myself really | |
| sumner2k3 |
posted on 15th Aug 08 at 14:18 |
you can see the bolt inside the hole but nothing is sticking out | |
| Ellis |
posted on 15th Aug 08 at 14:16 |
You could probably drill them yourself with a steady hand, then tap the hole again | |
| B3KAN |
posted on 15th Aug 08 at 14:11 |
Is any off the bolt still showing? or sticking out? | |
| sumner2k3 |
posted on 15th Aug 08 at 13:59 |
last nite my alternator belt came off again and i realised the all my engine mount bolts had snapped inside the block.. how do i get them out? i know i can drill them out but is this something i can do or does it need to be properly done by a profesional? |