|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » how hard is it to wire calibra heated seats.. » Post Reply
|
mattievRS |
posted on 13th Aug 08 at 21:57 |
one thing to remember is they take about 5 mins to warm up!!Then it gets hot hot hot!!!! Bit like sitting in warm piss lol!:! | |
Minty_Fresh |
posted on 13th Aug 08 at 18:08 |
nice one :) | |
mattievRS |
posted on 13th Aug 08 at 16:44 |
if the loom is already there then all the connections will be there.The car part of the loom usually runs from left to right underneath the seats and carpet.It will almost certainly be taped up in the loom,as for the seats there should be a connector on the bottom of the seat on the wire hanging out. | |
Minty_Fresh |
posted on 13th Aug 08 at 16:09 |
what do i need to connect them up? | |
rikkgti |
posted on 13th Aug 08 at 11:16 |
yes | |
pow |
posted on 13th Aug 08 at 10:31 |
If the wiring isnt there it's easy enough to make up | |
supermike |
posted on 13th Aug 08 at 06:54 |
Ah handy, im planning doing this with veccy seats! | |
Limecat |
posted on 13th Aug 08 at 00:25 |
Depending on the model the wiring for the buttons are located behind the oval section where the slider is on the centre console. You will either need to file out the holes for the buttons from the panel or order it from Vauxhall. The loom is beneith the seats. | |
Minty_Fresh |
posted on 12th Aug 08 at 23:39 |
im getting calibra leather interior the weekend, and realy fancy wiring the heated front seats up.. |