|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Gearbox (Reverse Crunching etc) » Post Reply
|
davec495 |
posted on 30th Jul 08 at 09:12 |
sounds like it just needs adjusting mine use to do it every once in a while i just adjusted it till the cluch was a touch higher than the brake pedal | |
antoni |
posted on 29th Jul 08 at 22:21 |
mine used to doi the same. | |
thegsi |
posted on 29th Jul 08 at 22:14 |
Could be clutch not engaging the gear properly. My VTS was murder so used to pump the clutch few times and it made it smoother. I would say get you clutch replaced when it becomes serious (slipping gears) and get them to also check the gearbox for any damage/wear at the same time. | |
Toby |
posted on 29th Jul 08 at 22:05 |
what i said at beggining | |
Steve X16XE |
posted on 29th Jul 08 at 18:59 |
Twist it clockwise 2 times. | |
mattievRS |
posted on 29th Jul 08 at 18:56 |
^^^^ what he said ^^^^ | |
Steve X16XE |
posted on 29th Jul 08 at 18:48 |
Have you tried adjusting it? | |
LukeD |
posted on 29th Jul 08 at 18:44 |
Thought ild take the car for a quick spin to see if its any better, and no. even worse- Finding it very difficult to get into first gear now. :( im guessing its a major problem? | |
LukeD |
posted on 27th Jul 08 at 19:49 |
So the clutch is on its way out then? (sorry-long day) :P | |
ainsley_brader |
posted on 27th Jul 08 at 18:52 |
its clutch. | |
M055360 |
posted on 27th Jul 08 at 16:33 |
i had this problem on my 1.6 sport got a short shift gear linkage and sum new nylon bushes now it goes into gear so easily. | |
Charlotte |
posted on 27th Jul 08 at 14:01 |
This will probs sound really stupid but im going to type it anyways. | |
LukeD |
posted on 27th Jul 08 at 13:49 |
quote: Nope, to my knowledge it aint changed. but worth a try tho. just tends to happen on warm days. :boggle: | |
Toby |
posted on 27th Jul 08 at 13:44 |
has the biting point on the clutch changed? try tightening the clutch cable first | |
LukeD |
posted on 27th Jul 08 at 12:25 |
Been having a few problems with the gearbox today. low gears are feeling quite "stiff" to change gear in to, and reverse is such a mission. its keeps "crunching" when reverse is selected. It does get in eventually, but its a pain,and takes a while. |