|
|
LukeD
|
posted on 4th May 08 at 10:55 |
It would work, but as swedge says. Alot easier just to skim the small gaps with the filler. + dont know of anyone thats done it the way you suggested.
Just smooth badge recess over. and skim the corners a tad. ;)
[Edited on 04-05-2008 by LukeD]
|
Jam666
|
posted on 4th May 08 at 10:48 |
but the way i mentioned in my eyes would be the same work..and also it would accept the grill perfect? has any1 dun this before?
|
swedge
|
posted on 4th May 08 at 10:46 |
most people just put something in the gap then fibre glass then skim it with filler
alot easier
|
Jam666
|
 posted on 4th May 08 at 10:44 |
Right, if i got a standard bumper (picture below) and cut it out where the red lines are in the picture, and did the same on my gsi, would this be the easiest way to change my gsi to accept a standard grill? comments would be very helpful..!!! thanks:thumbs:
http://i277.photobucket.com/albums/kk45/jam0666/bumper.jpg
[Edited on 04-05-2008 by Jam666]
|
