|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Hi, and help needed » Post Reply
|
Roffo |
posted on 15th Apr 08 at 19:41 |
try sorting the drainage like i said it then wait for it to dry out. looks like its overflowed into the matrix. happened in my polo, was fine when i dryed it out. | |
max 1.4 |
posted on 15th Apr 08 at 17:59 |
Well had a look at it again 2day and i think the matrix if ducked, the carpet near the centre console is wet and the heater only works sumtimes now :( | |
Roffo |
posted on 14th Apr 08 at 16:38 |
check the pollen filter area, and check for the drainage hole. if its blocked water will get in.;) | |
mattievRS |
posted on 14th Apr 08 at 15:30 |
Is the car losing coolant at all? Maybe a leak in the matrix.Also have you used radweld on it at all?Id give the coolant system a good flush out with a hose and do it both ways too,thru the stat housing and the header tank and refill with coolant and boil the water over to bleed the system again and see what happens. | |
darrend2007 |
posted on 13th Apr 08 at 22:13 |
tahts what mine done before matrix fuck | |
max 1.4 |
posted on 13th Apr 08 at 22:11 |
no dont think its head gasket. heater works fine. | |
mattievRS |
posted on 13th Apr 08 at 11:23 |
thats also a common problem with a buggered head gasket mate.does the heater blow warm air at all?Does the car overheat?Checked the coolant for oil?Checked the oil cap for mayo like stuff? | |
max 1.4 |
posted on 12th Apr 08 at 21:28 |
No, not wen stationary. | |
Richardhhha |
posted on 12th Apr 08 at 21:26 |
bleeding the coolant system is easy, whap your heaters on full, and on hot, take the expansion bottle cap off, and run untill fan kicks in. then leave the cap off for about 10 minuits and it will be bled, | |
max 1.4 |
posted on 12th Apr 08 at 21:19 |
No deffinetlty not coming from the doors. | |
Richardhhha |
posted on 12th Apr 08 at 21:17 |
try bleding the collant system, might find that is has a slight air lock and this is alowing the water to "slosh" arround... | |
fazza |
posted on 12th Apr 08 at 21:06 |
i know it can be expensive lol | |
max 1.4 |
posted on 12th Apr 08 at 20:58 |
Hello, im new to the site been looknig around and it looks brill :thumbs: |