|
|
Doldy
|
posted on 14th Apr 08 at 21:43 |
Problem was, the height adjuster on the drivers seat. had to go get new frame from scrappy without the height adjuster and now all is A OK! Cheers
|
Doldy
|
posted on 10th Apr 08 at 23:35 |
Awesome thanks for your help, will try it in the morning :) Thanks again!
|
SAL
|
posted on 10th Apr 08 at 22:17 |
put the corsa seat upside down, you will spot 4 17mm bolt's and nut's
these hold the seat to the sub-frame
un-do them and you have the bottom half free from the seat
bolt your new frame's to your new seat's first
then add the lower bit of frame from the original seat
on the new frame it look's like it wont fit, but they take 5 min's to do
|
Doldy
|
posted on 10th Apr 08 at 22:01 |
Hi, i brought some corsa b tailored subframes and some bucket seats.
I have been told that i need to use the orginal sub-frames and gliders from the standard corsa seats, then bolt the tailored subframes onto the standard sub-frames and the seats onto the tailored subframes.
I cannot see how to even get the original subframes off so can someone maybe guide me through it and how it should be done? Thanks, DOLDY
|
