|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » 1.2 16v to 1.4 16v wiring » Post Reply
|
Aldo69 |
posted on 23rd Mar 08 at 20:03 |
ok in the engine bay there is the 2 plugs,a black 1 with 4 wires and the other has various others,av joined from the black plug,thick red n blue(should be fuel pump),plain blue(should be temp guage)and black(ecu ign feed a think) then on the other plug av joined brown n white,thin blue n red,green and brown n blue!still no spark or fuel,any ideas?chip and transponder are changed aswell | |
Aldo69 |
posted on 23rd Mar 08 at 15:58 |
yeh got that,thats the way av wired it,its crankin but no spark or fuel,fuel pump wire etc r connected and all colour for colour as much as poss,left with a couple of wires spare that don't mate up,is it poss they join to another colour of wire?does any1 have a list of the colours and what they are for sxi and x14xe? know most of them but there r sum a don't know what the colours mean | |
luke85 |
posted on 23rd Mar 08 at 10:16 |
Never done a conversion from a 1.2 16V, is that the one with the ECU in the engine bay? Its a case of extemding some of the wires from where the old ECU was back to the drivers footwell where you will be putting the new ECU | |
Aldo69 |
posted on 22nd Mar 08 at 16:44 |
bump | |
Aldo69 |
posted on 21st Mar 08 at 19:07 |
Just wee question,am puttin an x14xe into a 1.2 16v shell for a boy,I've done countless 2ltr conversions etc but not in a 12 16v shell,am just wondering if sum1 can tell me how to wire it as the wiring is different as u will know! |