|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » ARP rod bolts - torque settings » Post Reply
|
RCS |
posted on 10th Feb 08 at 10:03 |
I measured them before I installed them, and they are fine. | |
Limecat |
posted on 9th Feb 08 at 23:09 |
You are re-using them? So you have used them once already? If you didn't measure them before use then getting the figures now are useless. | |
RCS |
posted on 9th Feb 08 at 22:50 |
Yeah I'm re-using them. Found the info on the arp website, should have checked there first really :lol: | |
Limecat |
posted on 9th Feb 08 at 22:40 |
The stretch limits are only relevant if you re-use them. You MUST measure them before first use though otherwise it is pointless. | |
RCS |
posted on 9th Feb 08 at 22:36 |
bump | |
csweatherston |
posted on 9th Feb 08 at 15:31 |
i thnik it says on the packaging.....ill have a look for it in a while. | |
RCS |
posted on 9th Feb 08 at 14:08 |
Found them on SBD site. | |
RCS |
posted on 9th Feb 08 at 13:52 |
Anyone got the torque settings? And the stretch limits? For a X16XE. |