|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » tightning cam caps..? » Post Reply
|
Limecat |
posted on 6th Feb 08 at 20:02 |
Another thing worth mentioning is to work them down in gradual stages, you don't need to fly in and do the first one to the relevant torque as you can potentially snap/damage the cam. Take your time and work in nice small increments. ;) | |
ainsley_brader |
posted on 6th Feb 08 at 18:08 |
circular from the middle out dont work inwards! | |
sumner2k3 |
posted on 6th Feb 08 at 17:07 |
oh ok cheers | |
Limecat |
posted on 6th Feb 08 at 17:00 |
No, the 2 on the casting by the dizzy are smaller. | |
sumner2k3 |
posted on 6th Feb 08 at 16:57 |
thought they were all the same size? | |
Limecat |
posted on 6th Feb 08 at 16:53 |
For the XE they are 20nm. | |
sumner2k3 |
posted on 6th Feb 08 at 16:51 |
is there a torque setting for tightening cam caps and also is there a sequence to tighten them in? |