|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » front tie bar bush now with pic » Post Reply
|
Cossie |
posted on 1st Feb 08 at 19:51 |
they are in place now used a vice but not so easy to put them in | |
Ste L |
posted on 1st Feb 08 at 16:56 |
like i said ;) | |
Cossie |
posted on 1st Feb 08 at 16:38 |
confirmed with powerflex they need to be pressed !!! | |
Cossie |
posted on 1st Feb 08 at 16:24 |
i email powerflex direct to see what they say !! | |
Ste L |
posted on 1st Feb 08 at 15:59 |
dont cut it, juts get it pressed in | |
Torsa g |
posted on 1st Feb 08 at 15:58 |
yeah | |
ryan_fowler1985 |
posted on 1st Feb 08 at 15:46 |
mmm mine are in 2 bits, aint fitted them yet are they easy to do? | |
Cossie |
posted on 1st Feb 08 at 13:06 |
| |
Cossie |
posted on 1st Feb 08 at 12:21 |
The one i got for my old corsa where cut in the middle already but they where different smaller bushes these are not cut in 2 pieces just one piece do i cut them in the middle ? | |
Torsa g |
posted on 1st Feb 08 at 12:19 |
the ones that i bought were in 2 pieces, a metal tube then cut in the middle, and they just slide on | |
Cossie |
posted on 1st Feb 08 at 12:17 |
Help please as I am trying to fit them right now and i am stuck :( | |
Cossie |
posted on 1st Feb 08 at 12:14 |
I got a set of poweflex front bushes for tie-bar to chassis (late chassis 97 >) and came in as single piece do I need to cut in half to fit it the front tie-bar bracket ? |