|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » torque setting for head bolts » Post Reply
|
sumner2k3 |
posted on 30th Jan 08 at 01:58 |
ahh rite.. so 25nm and 3 lots of 65 degree angle tightnings is fine then mate | |
Limecat |
posted on 30th Jan 08 at 01:56 |
It was due to a crack in the waterway, some people say it is a result of the way the head is torqued down - ie. too much causing undue pressure. | |
sumner2k3 |
posted on 30th Jan 08 at 01:39 |
what do you mean by the porous head issues? tightening it wrong will cause a porous head? | |
Limecat |
posted on 30th Jan 08 at 01:31 |
You will probably get a few different answers depending on your take on it? | |
sumner2k3 |
posted on 30th Jan 08 at 00:41 |
what is the torque setting for the head bolts on a c20xe? |