|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Corsa XE negative camber????? Anyone else had this problem? » Post Reply
|
ryan_fowler1985 |
posted on 29th Jan 08 at 17:39 |
the bolts are availible from lmf for £20 just ordered some | |
adam.d |
posted on 29th Jan 08 at 17:05 |
Now sorted! hubs and bearings weren't pressed in farr enough:!, adjusted tracking and away I go:thumbs: | |
adam.d |
posted on 28th Jan 08 at 22:09 |
You remove the top bolt out of the 2 that hold the strut to the steering knuckle and put the control bolt in there. | |
byrnie_2004 |
posted on 28th Jan 08 at 21:10 |
quote: just been looking at these, (demon tweeks ones) where do you fit them? any pics fitted? | |
aron |
posted on 28th Jan 08 at 20:52 |
mine has negative front camber down 60mm on spax. | |
AndyCorsaSport |
posted on 28th Jan 08 at 20:27 |
Mine looks like it aswell, lowered 60mm on Gmax at front. | |
adam.d |
posted on 28th Jan 08 at 18:52 |
What would happen if I just used a thinner bolt instead of 1 of these camber bolts? this would give me the adjustment I need? Or if I made the bolt hole bigger in the strut so I had some more adjustment? | |
adam.d |
posted on 28th Jan 08 at 18:50 |
Its been lowered 60mm on standard shocks, looks like this is my problem then. | |
Limecat |
posted on 28th Jan 08 at 18:48 |
Camber bolts, about £30 from Demon Tweaks, or alternative use more expensive eccentric top mounts. | |
adam.d |
posted on 28th Jan 08 at 18:46 |
Both front wheels are not straight, both go in at the top (negative camber) has anyone else had this problem? how did you solve it? |