|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » will a c16xe go in a tigra with a x14xe ok and run on x14xe wiring? » Post Reply
|
Vaux Lad |
posted on 4th Dec 07 at 15:01 |
Whichever you can find. | |
jamie m |
posted on 4th Dec 07 at 14:28 |
so which am i best going for x16xe or c16xe and il us the loom required for whichever engine. | |
Vaux Lad |
posted on 4th Dec 07 at 11:28 |
Aye/\ | |
Superlite Ltd. |
posted on 4th Dec 07 at 09:24 |
quote: nope, sensors are different as is wiring | |
ffls |
posted on 4th Dec 07 at 01:43 |
I ran an c16xe block with a x16xe head and X14xe loom and ECU:lol: | |
ainsley_brader |
posted on 3rd Dec 07 at 23:49 |
The c16xe won't run on the x14xe loom with the c16xe ecu you could rtun the c16xe on the x14xe iloom f you used all the x14xe sensors and ecu. | |
Limecat |
posted on 3rd Dec 07 at 22:34 |
quote: No, there are lots of redundant connections and I also recall it differing on the fan plug (or something in that region) plus things like the strike pin and something to the rear of the block, perhaps due to the lack of EGR? There was also differences in the injector loom etc, I think it may have been the C16XE loom was removable but the X14XE wasn't? Its not far off 2 years since I did one so I am damn vague. I seem to recall that the actual plug for the ECU is different as well? | |
Dave A |
posted on 3rd Dec 07 at 21:31 |
loom, ecu and lots of other wiring is different. | |
jamie m |
posted on 3rd Dec 07 at 21:25 |
obviously the c16xe ecu to match the engine but will a c16xe engine and ecu work ok on a x14xe loom?? | |
Richardhhha |
posted on 3rd Dec 07 at 21:15 |
quote: i think...... dont hold me to that lol | |
Richardhhha |
posted on 3rd Dec 07 at 21:14 |
if you run a c16 you will need to run a different ecu thats all. | |
jamie m |
posted on 3rd Dec 07 at 21:08 |
the x14xe thats in it already uses a transponder etc... so a x16xe should be fine, just use the x16xe ecu x16xe chip and x16xe engine just leave the x14xe loom in place what im wondering though is if i wanted to use a c16xe engine that does not run a transponder chip or immobalised ecu can i still use the x14xe loom but obviously i wont need any of the transponder wiring so it will all be useless and spare? | |
Limecat |
posted on 3rd Dec 07 at 19:52 |
No, the wiring is different in a big way. | |
jamie m |
posted on 3rd Dec 07 at 18:03 |
ok im having trouble finding an x16xe engine for my girlfriends tigra as here x14xe has had it, but theres plenty of c16xe engine knocking about, i know it will all mount up and fit ok but will the wiring etc be the same as the x16xe uses a chip in the key and transponder round the barrel for the ecu to de-mobalise is it a case of just fitting the c16xe in the x14xe place and plugging the c16xe ecu into the original wiring?? cheers jamie |