|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » C20let F28 speedo Problem » Post Reply
|
craig_s |
posted on 5th Dec 07 at 15:33 |
can't he just connect the green wire from the loom by the dizzy/coil(rev counter wire) to the rev counter wire on the back of the electric clocks? | |
Ben ev |
posted on 4th Dec 07 at 21:56 |
quote: it dosnt work like that mate. the signal for the calibras is taken from the abs. elec corsa clocks use a similar sensor to the cables in the diff but replace the cable with a signal wire. hense needing to drill and tap the casing to acept a sender. ime sure someone on mig or vauxsport will have a template they may be kind enough to send you | |
OliSteadman |
posted on 4th Dec 07 at 19:32 |
Why not just get sum electronic clocks from later sports etc? | |
luke85 |
posted on 4th Dec 07 at 17:24 |
If its an "electronic F28" then if wont have the part that accepts the cable or transducer over the diff. Is yours like this? Some people say they have an electronic F28 because they see an electronic sender screwed in there but that doesnt make it the electronic speedo type that everyone talks about. | |
Ben ev |
posted on 2nd Dec 07 at 18:12 |
http://www.corsasport.co.uk/board/viewthread.php?tid=397654 | |
ShEp |
posted on 2nd Dec 07 at 14:30 |
transducer | |
jord77 |
posted on 2nd Dec 07 at 14:27 |
Hi people need a little help got a corsa b with a c20let with a f28 electronic gearbox the problem is that the clocks are cable driven how do i convert this to work |