It goes to the fuel tank vent valve(on side of inlet)

It sits in the drivers wing and a pipe comes from it right across the back of the engine and appears just under the header tank

never hered of a charcole canaster mate, take a pic and show might know then

Thats Excellent, Cheers


Where does the charcoal cannister connect to

ok heres some pics fsorry about quality but i just took them

for MAF sensor Hose




for FPR




hope this helps you

ok the one for the FPR is at the front of the inlet manifold, if you look down where square part is near the coil pack there is a metal tube coming from the manifold this joines to the
oh bugger it i'll take a few pics and post them up in a few minuits

T T T

anyone with a 1.4 16v sport or 1.6 16v can you take five minustes and have a look for me or evan upload a photo of them so i can get mine plummed in correctly.... Please

Anyone able to help

Hello people, I aint been on cs for ages, I hope everyone is still as helpful as they used to be.

Basicly I have taken the 1.4 8v lump out of a corsa and fit a 1.4 16v I cant remember where all the vacuum pipes connect. could you post links to pictures or tell me which vacuum pipe goes to where

I believe the vacuum pipe from the servo goes to the sensor on the ns suspension area
The one from the exhaust manifold also goes to the ns suspension sensor

where does the one off the MAF go to ?
where does the one off the FPR go ?
also one from the front of the cylinder head ?
also one from the charcoal cannister ?

Thanks in advance for any help ! :thumbs: