Ahh, all good though if it sounds sweet :D

I've also been looking @ SPL dynamics 6.5" comps for similar money, also sposed to be very impressive... both are efficient too so be ok on the head unit for a bit...

Think the hertz have less mounting depth to worry about though :)

Should complement your set up a treat dave!

I don't know how my crossover boxes were put on, it was done by a company called RMD Audio

I have my bass on -4 out of -6 lol :) I let the sub do most of the work but with 220w RMS to it its pretty bassy anyway in a little cabin, shame everything rattles!

Crossover can just stick behind the door card easy enough, as for getting wires INTO the doors, its a proper twat apparently :(

Where do you mount the crossover boxes when instaling comps as if youve got an amp in your boot how do you get a wire from that all the way to inside your door.

I got a 500 watt sub in the boot and they are the only other speakers in my car and they keep up with it very well.

I've even got the bass on -3 as it's too loud! They have never destorted either.

ah cool, yeah i wanted 6.5" for a bit more midbass. how do you find the 5.25" ones though for bass?

cheers :D

Exactly the same as those but I went for the 13cm model

sounds good, which model did you go for? i been looking at these:

http://www.caraudiodirect.co.uk/hertz-dieci-p-6123.html

I haven't got them amped at the mo and they still sound good.

The guys that installed them said that they would sound even better when amped.

I've been looking at the 75 quid hertz components, have you got them amped mate?

I aint putting 6*9's in my doors lol :)

At the mo I've got the following in my car:

- JVC KD-G611 head unit
- GM front tweeters
- Alpine Type S speakers - SPS-13C2 5-1/4" fronts, SPS-69C3 6"x9" rears
- Custom made "stealth shelf" braced, angled speaker mounts etc.
- JBL GTO2000 amp
- JBL GT4 12" sub in sealed 1cu/ft box
- Autoleads 4 AWG wiring kit, head unit ISO loom and front door mounts

Thinking front comps and eventually a 4 channel amp to run them and bridge other 2 channels for the sub and probably a better sub but skint so doing things in stages lol

i got sony explode 6*9's in my doors, got custom mounts made onto the door for fitting them.

Why not get some halfords adaptor rings and something like some Hertz components?

I've got them fitted in my corsa and the sound quality is amazing!

yeah ive got some already but i work in halfords if i need more lol

shame them pioneers wouldnt fit, they look nice :)

Don't think they will mate, i got some autoleads adaptors from halfords :thumbs:

http://www.caraudiodirect.co.uk/pioneer-tsq172c-vauxhall-p-5914.html?cadid=9549dd0012b002ae16af3e0df41ab9c3

been looking at these vaux specific ones. but they say for corsa c... wouldn't these fit in B's also??? look the same @ least! lol

I'm completely impractical so I'd have to buy pods or have them made.. lol.

I've got autoleads adapters for my fronts at the mo so can reuse them.

Is it 63mm mounting depth I need for new speakers as a maximum?

quote:

---

Originally posted by swedge
make some pods

---

ive got some infinity 6622's or summet but i got the slimline ones so they have a shallow mounting depth, think they were bout 7 quid more than normal ones and just used the autoleads apadter i already had

ive got 6.5" components in mine with the normal plastic ataptors and have no problems, just gotta watch out for how big the magnet is on the comp

make some pods

Hi guys.

Just wondering what people are running in Corsa B's, front doors, 6.5" components... as I know theres issues with mounting depths, catching the window and so on, also on my old Corsa I had to cut door metal so the speaker connectors could sit flush without getting squished!

Looking at getting some comps for my latest Corsa (just got 5.25" coax's at the mo) so wondering what you guys run, any mounting probs or mods you had to do and what you'd recommend for a Corsa either way :)

Cheers!