Corsa Sport - for Vauxhall and Opel Corsa B, Corsa C and Corsa D

Not logged in [Login - Register]

You Are Not Registered Or Not Logged In

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Few GSI kit questions » Post Reply

Who Can Post?

All users can post new topics and all users can reply.

Icon:

Formatting Mode:
Normal
Advanced
Help

Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On

Post Options:

Disable smileys?
Turn BBCode off?
Receive email notification of new replies?


Limecat	posted on 22nd Oct 07 at 23:38
	1. I am 99% certain it is, I can check tomorrow if needs be? 2. The skirts will 'slide off' if you push them forwards with the hockey stick sections off. Once the skirts are off the white plastic retention clips slide off easily as well, on the ones that are held in place by rusty pegs/rivets you may need to use a drift and a mild tap from a hammer as they are too tight for fingers. 3. Cut down the arches. The front wings also need one of the clips fitting each side.
Mark.W	posted on 22nd Oct 07 at 21:04
	im wanting a gsi front bumper and fogs too.is it much work to change the whole headlight loom or what ever you need to do to fit the fogs?
ChrisBoom	posted on 20th Oct 07 at 18:06
	ttt
ChrisBoom	posted on 19th Oct 07 at 15:57
	quote: Originally posted by fro-dizzle Mine were already cut down and black when i bought them chris :P Oops, meant to say the fogs :lol:
Fro	posted on 19th Oct 07 at 08:14
	Mine were already cut down and black when i bought them chris :P
B3KAN	posted on 18th Oct 07 at 23:07
	quote: Originally posted by B3KAN Why not just take the arches off the gsi :boggle: least then they will be a perfect fit :thumbs: His are fucked, some idiot has put wood screws through them :lol: :rolleyes: well it did come from dingwall :o :lol: [Edited on 18-10-2007 by B3KAN]
ChrisBoom	posted on 18th Oct 07 at 22:21
	quote: Originally posted by fro-dizzle 1. I believe that it is part of the headlight loom so you will have to change and replace the lot of that if you want it to be a factory job (i looked at it and it looked a right pain in the arse! 2. Not sure :lol: 3. You will have to cut down your standard arches to fit the skirts as the arches sit just over the the l-piece on the back and just over where the skirt turns up on the front. I see, how did you do yours? quote: Originally posted by B3KAN Why not just take the arches off the gsi :boggle: least then they will be a perfect fit :thumbs: His are fucked, some idiot has put wood screws through them :lol:
Ben ev	posted on 18th Oct 07 at 21:45
	quote: Originally posted by ChrisBoom 2. How do you remove the GSI skirts from the clips? jack it up then watch the car fall off the jack and hey presto the skirt is off. seemed to work with mine yesterday:rolleyes:
B3KAN	posted on 18th Oct 07 at 12:32
	Why not just take the arches off the gsi :boggle: least then they will be a perfect fit :thumbs:
Stu_22	posted on 18th Oct 07 at 09:25
	Just pull the skirts off the clips
Fro	posted on 18th Oct 07 at 08:13
	1. I believe that it is part of the headlight loom so you will have to change and replace the lot of that if you want it to be a factory job (i looked at it and it looked a right pain in the arse! 2. Not sure :lol: 3. You will have to cut down your standard arches to fit the skirts as the arches sit just over the the l-piece on the back and just over where the skirt turns up on the front.
ChrisBoom	posted on 17th Oct 07 at 22:50
	1. The GSI fog light loom, is it wired into the main headlight loom? Best way to wire them up, Ill have the whole GSI loom to play with, bar the engine loom. 2. How do you remove the GSI skirts from the clips? 3. Can the skirts be fitted without cutting down the arches, or do they have to be cut down?