|
|
|
Not logged in [Login - Register] |
 |
You Are Not Registered Or Not Logged In |
|  |
|
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » fitting digi dash » Post Reply
|
| Dave-Creations |
posted on 13th Nov 07 at 19:42 |
my digi dash reads fuel guage perfectly :D tested down to running out of petrol, and its A OK :D | |
| DAZ1985 |
posted on 13th Nov 07 at 17:18 |
Thats because on the digi dash, R27 is the fuel bias resistor. Changing this resistor will result in the fuel gauge reading differently | |
| scottc1088 |
posted on 13th Nov 07 at 17:04 |
wiring is basically colour for colour you have to wire the indicator tell tale into the switch though. ill take some pics of mine as im changing my car loom soon so got to wire it in again. my fuel gauge works but when the light comes on its really low so dont usually let it get that low | |
| DAZ1985 |
posted on 5th Oct 07 at 15:30 |
Its been known that the fuel gauge doesnt read properly, because of the resistance or something | |
| jamied |
posted on 5th Oct 07 at 00:10 |
yes just take out the old transducer and pop in the new one, is a bit tight but doable.Yeh my fuel guage is accurate but like all corsas up and down. also has a neat little flashing light when low | |
| TheCam |
posted on 4th Oct 07 at 23:22 |
would a digi cluster fit into a corsa dash and would it work ok with a C20SEH and F20 box? | |
| DAZ1985 |
posted on 4th Oct 07 at 22:04 |
good luck :thumbs: :lol: | |
| mark_gsi |
posted on 4th Oct 07 at 22:02 |
ill just stick it there any way im sure thats where its ment to go. | |
| DAZ1985 |
posted on 4th Oct 07 at 21:52 |
I wouldnt know mate Im quite sure i've got and electronic transducer as i've got a mech f28 with tigra electric clocks, so im just assuming im getting an electric pulse off that | |
| mark_gsi |
posted on 4th Oct 07 at 21:48 |
aye, i will get a few pics of how it goes wiring etc. im not looking forward to it. does the transducer go in where the cable speedo went?? | |
| DAZ1985 |
posted on 4th Oct 07 at 21:46 |
Should be too bad but please give some feedback how it goes as ill be doing mine when i can be arsed get round to it | |
| mark_gsi |
posted on 4th Oct 07 at 21:35 |
daz cheers for that hopfully will help a bit. hope it all goes ok. | |
| DAZ1985 |
posted on 4th Oct 07 at 19:19 |
306 corsa does your fuel gauge work right? is it accurate? | |
| jamied |
posted on 4th Oct 07 at 19:08 |
i used no guides whatsoever i just went colour to colour and it works fine | |
| DAZ1985 |
posted on 4th Oct 07 at 18:38 |
This might help | |
| corsaggh |
posted on 4th Oct 07 at 18:05 |
http://corsasport.co.uk/board/viewthread.php?tid=35952 | |
| mark_gsi |
posted on 4th Oct 07 at 11:12 |
Right im going to be fitting my digi dash this weekend. got everything i need, does the tranducer go into the gear box where the original speedos cable went? any advice tips on making it easyer? |
