|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » makin m own depos » Post Reply
|
CorsAsh |
posted on 18th Aug 07 at 19:36 |
http://www.corsasport.co.uk/board/viewthread.php?tid=377606 | |
DAZ1985 |
posted on 18th Aug 07 at 18:13 |
quote: you clearly dont know what your on about | |
Scotty C |
posted on 18th Aug 07 at 18:07 |
Was just going to type that Ash :lol: | |
CorsAsh |
posted on 18th Aug 07 at 18:04 |
Just buy some proper Depos, not that dear. | |
andyc1234 |
posted on 18th Aug 07 at 17:41 |
the bit you paint black has nothing to do with the light at all its only the chrome surround inside you spray not the reflectors. cost £5 for a can of paint wow. | |
DAZ1985 |
posted on 18th Aug 07 at 17:39 |
for how much proper depos cost its not worth it and diy job isnt the same as it dont have the part in the light that reflects the beam back into the reflective part | |
ad-sport |
posted on 18th Aug 07 at 17:39 |
nice 1 mate ill giv it ago in the week then thanx alot | |
andyc1234 |
posted on 18th Aug 07 at 17:33 |
it just needs to be slow heat on it so it doesnt crack and to let the glue melt thats why you need to keep checking it so you dont leave it in longer than you need to. | |
ad-sport |
posted on 18th Aug 07 at 17:26 |
ok pal ill try that, just tried using a blow torch t warm the glue but itcracked the lense! only at the bottom tho so ill just run sum sealer over it | |
andyc1234 |
posted on 18th Aug 07 at 17:23 |
stick it in the oven for 10 mins and i used a butter knife on the edge to prise it apart . a screwdriver chips the glass a bit. just take all the bulbs out and put it in on low for 5 mins and just try a corner if its not softened put it back for another 5 until you can prise it apart | |
ad-sport |
posted on 18th Aug 07 at 17:17 |
has any1 everdone this? tryin to get the glass off but im struglin so any help would be cool:thumbs: |