|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » ecu » Post Reply
|
andyc1234 |
posted on 10th Aug 07 at 17:08 |
good stuff :thumbs: | |
paolo |
posted on 10th Aug 07 at 17:03 |
yes a local garage, booked in on tuesday, jus need to get it in the boot now! | |
andyc1234 |
posted on 10th Aug 07 at 17:01 |
you found anywere to change the engine yet? | |
andyc1234 |
posted on 10th Aug 07 at 17:00 |
:thumbs: sorted then | |
paolo |
posted on 10th Aug 07 at 16:56 |
yes I have the chip and transponder also | |
andyc1234 |
posted on 10th Aug 07 at 16:40 |
you should be fine with that. do you have the chip for the key and the immobiliser ring to go with the 1.6 ecu? | |
paolo |
posted on 10th Aug 07 at 15:11 |
thank you for this information andy and all the information you give me the other night!! that is good news, because the loom on the car at the moment has red and white plugs, and the 1.6 ecu I have found has red and white plugs!! soo all should work?? | |
andyc1234 |
posted on 10th Aug 07 at 15:04 |
as i tried explaining before the colour of the plugs is not if its a 1.4 or 1.6 ecu. if you have white and red plugs at the moment you need to find a 1.6 ecu with white and red plugs or else you will have to change the wiring to one with plugs on that matches the plugs on your new 1.6 ecu or it will rev limit at 4000 rpm due to it being a different knock sensor circuit. | |
paolo |
posted on 10th Aug 07 at 14:50 |
i was seriously considering buying your!!! but some one beat me to it! gutted | |
andyc1234 |
posted on 10th Aug 07 at 14:47 |
:lol: | |
paolo |
posted on 10th Aug 07 at 13:07 |
i am swopping the engine to an x16xe sooo need an x16xe ecu...soo can i plug any one into my loom...I bought a loom beacause when searching through threads ppl were tol to get engine, loom and ecu for the conversion! | |
Corsa Phil 666 |
posted on 10th Aug 07 at 12:00 |
Ecu plugs are the same but the map for the management is different. I run a x16xe ecu on my x14xe for about a year. Slight noticable improvement in power. I also done it to ensure the ecu worked properly befor fitting my new engine. You can run a x16xe on a x14xe ecu but it'll be running very slightly lean. Which long probably isn't a good thing. | |
paolo |
posted on 9th Aug 07 at 20:03 |
the problem I am having is I have bought a loom with red and white plugs but I dont know what ecu to plug it into! | |
Dave A |
posted on 9th Aug 07 at 19:30 |
plug colours mean nothing. | |
paolo |
posted on 9th Aug 07 at 19:09 |
cant get the code at the minute its in mi mates garden...not taxed! but about the plug colours...any ideas? | |
Dave A |
posted on 9th Aug 07 at 19:07 |
late ecu's were identical (But obly very very few) | |
Ste L |
posted on 9th Aug 07 at 19:07 |
ecu;s are different, both run different map's | |
paolo |
posted on 9th Aug 07 at 19:03 |
hi just wondering if my ecu from my x14xe is the same as the x16xe cause i read that some uses the same management? the codes on the ecu or D96017 |