|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » 2.0 let conversion » Post Reply
|
Cossie |
posted on 11th Jul 07 at 13:14 |
good : !! and thanks !! | |
DAZ1985 |
posted on 10th Jul 07 at 21:45 |
If you buy the proper mounts, no welding | |
teddytopend |
posted on 10th Jul 07 at 21:41 |
nope no welding needed. :) | |
Cossie |
posted on 10th Jul 07 at 20:00 |
All I need to know if in both case I need to weld a bracket for the rh mounting ???? | |
Cossie |
posted on 10th Jul 07 at 19:46 |
i have the power steering from another corsa which i had an accident and it's a write off but i am seing other corsas now , If i fit a 2.0 engine which one will be easy to mount the engine in ?? the 16v or the 8 valves | |
DAZ1985 |
posted on 10th Jul 07 at 19:10 |
16v and 12v power steering is different though | |
C4RL0 |
posted on 10th Jul 07 at 19:06 |
The 16v and 12v are the same chassis, it's the 8v which is different. If you already have power steering then all you need is the pump from the LET or XE and the PAS mount as well. | |
ed |
posted on 10th Jul 07 at 09:40 |
You searched but you didn't look in FAQ ;) | |
Cossie |
posted on 10th Jul 07 at 09:25 |
yes that why i asked if if 16v or 12v which will be better as i know the mountings are different, so in both cases do I need to change mounting ? alread got normal power steering ! | |
C4RL0 |
posted on 10th Jul 07 at 06:29 |
The only difference is between the shells, if you get a 16v or a 12v motor to start with then you need to get another chassis mount for the LET or XE. | |
Cossie |
posted on 10th Jul 07 at 06:14 |
I know that maybe has been covered many time but I tried the search and I couldn't find any solution for my problem, here is my question if I find a corsa 1.2 which would be ideal for convesion to a 2.0 let a 1.2 8v or 1.2 16v post 98 ?? also would like to install a power steering!!! hope someone can give me a hint thanks !!! |