|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » SARD FPR arrived (japense instructions) » Post Reply
|
DAZ1985 |
posted on 5th Jul 07 at 16:53 |
yes im using o rings | |
Ben ev |
posted on 5th Jul 07 at 16:29 |
make sure u use o rings or it WILL leak! | |
DAZ1985 |
posted on 5th Jul 07 at 16:01 |
Sorted, i've nearly finished making my blanking plate at work so weather permiting ill be having a crack at it this weekend | |
Ben ev |
posted on 4th Jul 07 at 17:24 |
you put the blanking plate on were the standed regulater goes. this inturn blanks off the old return line on the baclk of the rail so you can just leave that with no hose on it. run a hose from the new outlet on the blanking plate to the regulator. then another hose from the regulator outlet to the standed return hose that used to plug in the rail. the inlet on the regualtor is the one on the side and the return is the one on the end opposite the vacum bit | |
DAZ1985 |
posted on 4th Jul 07 at 14:21 |
So.... | |
vxlgsi |
posted on 4th Jul 07 at 14:15 |
if you have a blanking plug fit it... then fit the fpr into the return line.. job done | |
DAZ1985 |
posted on 4th Jul 07 at 12:40 |
| |
DAZ1985 |
posted on 4th Jul 07 at 12:38 |
Can anyone give any info on fitting one to a c20let? I can understand my instructions :lol: or pics of what pipes go where |