yes im using o rings

make sure u use o rings or it WILL leak!

Sorted, i've nearly finished making my blanking plate at work so weather permiting ill be having a crack at it this weekend

you put the blanking plate on were the standed regulater goes. this inturn blanks off the old return line on the baclk of the rail so you can just leave that with no hose on it. run a hose from the new outlet on the blanking plate to the regulator. then another hose from the regulator outlet to the standed return hose that used to plug in the rail. the inlet on the regualtor is the one on the side and the return is the one on the end opposite the vacum bit

So....
Remove return pipe
Plumb that into fpr

Then....
From fpr outlet back to the fuel rail
Blank off where existing regulator went?

if you have a blanking plug fit it... then fit the fpr into the return line.. job done

am i going to need one of these ?

[Edited on 04-07-2007 by DAZ1985]

Can anyone give any info on fitting one to a c20let? I can understand my instructions :lol: or pics of what pipes go where

I have got a general idea but nothing concrete

Thanks in advance :thumbs: