it can.. but its part of it:so it'll stay on eventually!

think i'll just go ahead an respray it.

Thanks for the help matey.

nitromors will probably take it back to the bare metal ye...puzzled which part your on about with plastic at one part, surely it must be able to be removed?

but using the nitromors, will that just leave it a bare SILVER' shell? obviously the colour of the metal? or what?

i'm 95% sure its metal.as theres a plastic covering at one point!


much appreciated for the help btw,guys!

cheers

is the paint on metal or plastic im unclear, if its plastic nitromors would eat the plastic (i believe) if its metal then ye nitromors it,

if plastic could just try sanding it lights with a little bit of heat alot of patience

nitromors?

olrite folks,

i'm thinking of doing something:i wont mentioned -what- yet: it involves removing paint from a certain part of the car. and keeping it the standard plastic-only thing is though.altho it shows plastic 'peel,on one part.the rest of it is painted.and i dont know whether it would go to a BLACK PLASTIC look?

if all else fails,it will just be painted black.
but any ideas,on how to remove manufacturer paint?


cheers for the help!