|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Help needed urgent - C20LET hoses » Post Reply
|
C4RL0 |
posted on 18th May 07 at 09:32 |
Sorted then. A trip to the pet shop it is. Cheers guys :thumbs: | |
Nic Barnes |
posted on 17th May 07 at 17:15 |
block pipe off that leaves tank vent valve with a bolt in a pipe. its not important, just leave it plugged in. | |
C4RL0 |
posted on 16th May 07 at 16:45 |
So I put it in so that air can be drawn into the inlet but not the other way? | |
Ben ev |
posted on 16th May 07 at 16:43 |
yep best place to get one is from a tropical fish shop. fits perfectly. make sure you put it in the right way round so boost pressure isnt lost into the rocker cover but vapour can still be drawn into the inlet | |
C4RL0 |
posted on 16th May 07 at 13:59 |
Right, here's what I've done. The 2 outlets on the throttle body next to each other, passenger side to the vent valve, drivers side straight to fpr. Outlet on inlet manifold to rocker cover. | |
Nic Barnes |
posted on 15th May 07 at 22:00 |
yeah bypass hot start valve not needed | |
Ben ev |
posted on 15th May 07 at 19:23 |
one on the left (rear of tb) is for the ecu. | |
C4RL0 |
posted on 15th May 07 at 17:24 |
Can anyone tell me where the circled outlets join up to? |