|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » What ID vaccum hose for FPR/inlet connection-16xe » Post Reply
|
Vaux Lad |
posted on 12th May 07 at 11:13 |
Ok, cheers. | |
Dave A |
posted on 12th May 07 at 09:06 |
get silicon hose with a 2mm i/d | |
Vaux Lad |
posted on 11th May 07 at 18:46 |
I'll see if i can find my micrometer so i can measure the width of the ends on the inlet and fpr etc. | |
RobHayes |
posted on 11th May 07 at 17:59 |
OD is more likely to be 8mm, ID probably around 2mm | |
Robin |
posted on 11th May 07 at 17:21 |
Internal diameter is a lot less than 8mm. I'd say it was 2mm max TBH. | |
Vaux Lad |
posted on 11th May 07 at 15:35 |
Anyone know what size ID silicone hose is needed for the FPR, tank vent valve vaccum connections? I was thinking 8mm, but the fpr connection looks a lot smaller than the inlet ones. :boggle: |