|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Dodgy Indicators » Post Reply
|
Chris_Sport |
posted on 11th May 07 at 12:42 |
Try the relay in the fuse box. | |
Fro |
posted on 11th May 07 at 12:11 |
What about the actual connectors on the end of the car loom? | |
CorsaKen1 |
posted on 11th May 07 at 12:10 |
No i checked that and yours was in better condition than mine | |
Fro |
posted on 11th May 07 at 12:05 |
:( | |
CorsaKen1 |
posted on 11th May 07 at 11:50 |
Bloody indicators TTT please - as Fro sent me a stalk which worked perfectly then sent him a u2u then went back out to retest them and after a couple of mins it started doing what I had the problem with in the first place - so had new stalk which works any other idea which is causing this please? | |
Fro |
posted on 9th May 07 at 08:13 |
I think i have a stalk at home somewhere if you need one ;) | |
CorsaKen1 |
posted on 8th May 07 at 23:09 |
excellent :thumbs: - job for tommorow/today :look: | |
Dave A |
posted on 8th May 07 at 23:08 |
yes. remove the shroud around the ignition (3 phillips screws under the shroud) and then you can press the clips that hold the stalk on, slide it out and then unplug and replace:) | |
CorsaKen1 |
posted on 8th May 07 at 23:05 |
:thumbs: cheers for the replies, one more thing as I'm crap with cars and checking oil is mainly what I can do :lol: is the stalk easy to remove and then refit? | |
Robin |
posted on 8th May 07 at 23:03 |
Yeah, it's 90% going to be a problem with one of the connections in it. | |
CorsaKen1 |
posted on 8th May 07 at 23:00 |
even though the stalk cancells correctly and full beam works? | |
Robin |
posted on 8th May 07 at 22:59 |
Go to a scrappy and find a new indicator stalk. | |
CorsaKen1 |
posted on 8th May 07 at 22:56 |
My indicators are being a bit tempermental one minute they work fine then next when selected the indicator light on the dash stays illuminated making a weird buzzing noise and when this happens the indicators are not working at all :boggle: any advice to whats causing this - all indicators bulbs are working |