|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » removing the inlet on a c16xe » Post Reply
|
gsirick |
posted on 2nd May 07 at 17:54 |
im plannin on fitting a performance inlet manifold with a bigger throttle body so the whole inlet will b comin off and the 1 i have brought (fitted to an x16xe lower inlet) will be fitted. have got the lower gasket (from the manifold to the head) its basically all set up ready to be fitted will just need to fit my fuel rail and injectors to the new inlet (from my old 1). | |
Superlite Ltd. |
posted on 2nd May 07 at 15:43 |
gsirick, do you want to remove the upper or lower inlet? Upper is easy, just remember to plug the hoses back after. | |
Superlite Ltd. |
posted on 2nd May 07 at 15:39 |
Good thread but Robin mentions the little green gasket between lower and upper inlet manifolds. The C16XE doesnt have one like that, only the X16XE has a green gasket. | |
CorsaKen1 |
posted on 2nd May 07 at 15:25 |
there is this thread http://www.corsasport.co.uk/board/viewthread.php?tid=298181 which is at the bottom in the related thread | |
gsirick |
posted on 2nd May 07 at 15:17 |
does any 1 no any rough ideas how to remove the inlet manifold on the c16xe engine? |