|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » footwell neons » Post Reply
|
arbi12 |
posted on 18th Mar 07 at 21:10 |
grey wire at drivers side kick panel you can use this for switched ground, just permanent live neon but dont forget to use in line fuse in this | |
Fonz |
posted on 18th Mar 07 at 11:50 |
find the door switch, the one that opperates the standard interior courtsey light | |
alan t |
posted on 16th Mar 07 at 22:03 |
cant remember mate if u look in the vehicle handbook it tells you what fuse is the interior light fuse but that didnt work when the light was on. u need to get a live from the wire going into the interior light and earth it anywhere on a clean bit of bodywork. as someone says before the wire runs up behind the a pillar | |
jared_corsa |
posted on 16th Mar 07 at 13:29 |
which fuse is the interior light from?? i want to do the same as corsa sport 16v | |
alan t |
posted on 13th Mar 07 at 22:28 |
could i scotch lock into this wire or better so solder? | |
alan t |
posted on 13th Mar 07 at 22:27 |
mines r +ve into the fusebox under the fuse which powers the interior light i thought this would have brought them on? cheers planty mate i'l have a look for it il need 2 remove the a pillar trim soon when i fit my gauges. | |
Skylined |
posted on 13th Mar 07 at 22:12 |
just tap the +ve wire off the +ve output for the interior lights in the fusebox. | |
Planty02 |
posted on 13th Mar 07 at 19:52 |
I soldered mine into the interior light wiring - the wiring runs behind the A-pillar trim (next to the windscreen) on the passenger side :thumbs: | |
alan t |
posted on 13th Mar 07 at 18:38 |
looks nice mate. how do you wire into door switch? scotch lock? | |
Fonz |
posted on 13th Mar 07 at 08:54 |
use the dorr switch. thats what i've done with my illuminating door sills | |
alan t |
posted on 12th Mar 07 at 18:34 |
just run the live of interior light? i'm not to clued up about this. lol. | |
Prowler |
posted on 12th Mar 07 at 17:43 |
wire it to the interior light | |
alan t |
posted on 11th Mar 07 at 18:26 |
ive got a set of neons under the dash which are supposed to light up the footwell. the neons are run off a switch but i would like them to come on when i open either of the front doors. how do i reconnect the wiring to do this? its currently getting a live from the fusebox and is earthed to the body of the vehicle. |