|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » c20xe wiring loom? » Post Reply
|
Rick Draper |
posted on 13th Jan 07 at 15:31 |
Your XE was probably not a late spec one that runs a dispac? | |
Ben ev |
posted on 13th Jan 07 at 14:17 |
my xe didnt have a air intake temp sensor. only have that on my let loom | |
Rick Draper |
posted on 13th Jan 07 at 14:04 |
Its for the air temp sensor iirc that is in the inlet pipe ducting between the air flow meter and the airbox. | |
Ben ev |
posted on 13th Jan 07 at 12:16 |
throttle posisition sensor, if next to afm | |
ed |
posted on 13th Jan 07 at 00:10 |
Yea, noticed that when I posted the pic :( | |
Ste L |
posted on 12th Jan 07 at 23:28 |
quote: thats usually on the cars loom, not engines iirc | |
ed |
posted on 12th Jan 07 at 21:58 |
Sorry, scrub that, wrong wire. It's could be the crankshaft position sensor actually. | |
ed |
posted on 12th Jan 07 at 21:57 |
Is it this one? | |
ed |
posted on 12th Jan 07 at 21:56 |
Probably goes to the oil presure sender... | |
damonbug |
posted on 12th Jan 07 at 19:50 |
one is brown and blue and the other is brown and green mate its a dispack wiring loom? cheers :thumbs: | |
willay |
posted on 12th Jan 07 at 19:40 |
mate can you get a colour of the cable or a picture? | |
scottc1088 |
posted on 12th Jan 07 at 19:15 |
air temp sensor? | |
damonbug |
posted on 12th Jan 07 at 19:10 |
hi putting a c20xe in my corsa out of a calibra, got the wiring loom nearly all in but theres a 2 pin connector coming out of the loom (taped in with the air flow meter plug (next to it) any1 know where this goes and what its for cheers :thumbs: |