|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Everything needed for a c20xe conversion » Post Reply
|
Alex16v |
posted on 7th Jan 07 at 13:10 |
quote: Cheers mate, much appreciated. Ill let you know after i have sorted the rest of the stuff out. :wave: | |
rallyman |
posted on 7th Jan 07 at 13:03 |
No problem alex, give us a shout if you need help with anything or cant find what you need.... | |
Alex16v |
posted on 7th Jan 07 at 12:48 |
quote: Thanks mate. Ill have a look into it now. I think i will go for just the top hose for now, then upgrade to all silicone in the future after i know its all running. Is the top hose on your website? EDIT: found it, it was on the next page. :thumbs: [Edited on 07-01-2007 by Alex16v] | |
rallyman |
posted on 7th Jan 07 at 12:21 |
Seam welding can be a bit over the top, would recommend putting the corsa strengthening kit on though! | |
Basscrazy |
posted on 6th Jan 07 at 19:09 |
just thinking if your wanting to do a really top wack job its worth it take to track days etc | |
Alex16v |
posted on 6th Jan 07 at 19:06 |
quote: thanks for the info, ill look into it. :thumbs: | |
Basscrazy |
posted on 6th Jan 07 at 18:55 |
seam welding is the proper way to do it didnt mean it had to be just some do | |
donvaux |
posted on 6th Jan 07 at 18:54 |
lol good thread that is | |
Alex16v |
posted on 6th Jan 07 at 18:52 |
Just found this! | |
Alex16v |
posted on 6th Jan 07 at 18:51 |
Ok cool, cheers. I didn't think anything needed welding. | |
C4RL0 |
posted on 6th Jan 07 at 18:49 |
Don't really need to seem weld anything | |
donvaux |
posted on 6th Jan 07 at 18:48 |
gsi shafts i found are fine, and alot cheaper and seam welding only really needs doing if your gonna rally it :) | |
Alex16v |
posted on 6th Jan 07 at 18:31 |
+ Time << yes, going to spend ALOT of time on this when i finally do it. | |
pdwhelan |
posted on 6th Jan 07 at 18:20 |
+BALLS | |
Basscrazy |
posted on 6th Jan 07 at 18:17 |
brakes | |
Alex16v |
posted on 6th Jan 07 at 18:11 |
Right i think i know what i need i just thought i would compile a list to make sure. (I have tried searching but no topics were too clear.) |