|
|
abdus
|
posted on 29th Dec 06 at 14:11 |
disconnect wiring connector from rear of headlight
there is a rubber dust cover/cap, remove it
then unclip the bulb, remove and put new one.
do the reverse for refitting
if changing driver's side, air intake should be removed
|
Teknologikal
|
posted on 29th Dec 06 at 14:10 |
Most headlight bulbs are universal.
Open your bonnet and look behind the headlight you want to replace and you'll see a 3-pin connector...undo it. Then, remove the rubber seal and you'll see a clip behind it that holds the bulb in place. Unclip it and the bulb should be freed.
Fitting is same as unfitting in reverse.
|
abdus
|
posted on 29th Dec 06 at 14:08 |
h4 fitment
|
dan_almond
|
posted on 29th Dec 06 at 14:05 |
One of my headlight bulb has gone. Im sure its a simple job but im unsure of how to change it. Can someone explain how i do it. Pics would be good.
Also i went into halfords for a replacement bulb, and they were unsure of which buld it was? Anyone know the part number at all?
Cheers :wave:
|
