corsasport.co.uk
  Not logged in [Login - Register]  
You Are Not Registered Or Not Logged In  

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » dodgy heater knob » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help
Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

City

 posted on 15th Nov 06 at 18:21

i have disturbed the connections at the back cause i can push it and it moves (not the connections on the heater knob) the connection in the white plastic will i know have to take it all apart to hold it in place??


AuroraSport

 posted on 15th Nov 06 at 17:21

well when i take my middle heater knob off, im left with the white bulb holder sticking out (for the illumination) that should stay in the console, if thats come out with the knob then it may have disturbed your connections


City

 posted on 15th Nov 06 at 17:18

quote:
Originally posted by AuroraSport
hmmm have you removed the white bulb holder for the HRW light? mines a bit wobbly and could have disturbed the connection?


not sure what ya mean mate i thort that bulb was sealed??


davey_jack

 posted on 15th Nov 06 at 17:18

probably just damaged, try another knob from breakers


AuroraSport

 posted on 15th Nov 06 at 17:17

hmmm have you removed the white bulb holder for the HRW light? mines a bit wobbly and could have disturbed the connection?


City

 posted on 15th Nov 06 at 17:13

quote:
Originally posted by AuroraSport
ahh right i can see what you mean now, just been out to the car and taken the knob off myself. hmmm has it always been loose? it shouldnt come loose unless you unclip it from the front?


is not loose fit in fine but the light was working now it aint?? (rear demister) heater lights not working, and unless you play with pins bend em slightly blower not working???


AuroraSport

 posted on 15th Nov 06 at 17:10

ahh right i can see what you mean now, just been out to the car and taken the knob off myself. hmmm has it always been loose? it shouldnt come loose unless you unclip it from the front?


City

 posted on 15th Nov 06 at 17:05

quote:
Originally posted by AuroraSport
only the top bit of the knob should pull out :boggle: you havent removed the whole lot have you?


u slide the screwdriver in and pull hard the knob comes out then at the back of it there are a few pins you can see were they slot into were the white plastic is


AuroraSport

 posted on 15th Nov 06 at 17:03

only the top bit of the knob should pull out :boggle: you havent removed the whole lot have you?


City

 posted on 15th Nov 06 at 17:01

middle knob mate the back of it


AuroraSport

 posted on 15th Nov 06 at 17:00

ok i need to clarify exactly what you've done



youve replaced the heater knobs above,
the outer two pull out and push back on, simple.
the middle one needs releasing from the clip and pull off, and push back on.
i cant see where this black connector is coming into the picture?


City

 posted on 15th Nov 06 at 16:55

quote:
Originally posted by AuroraSport
all the lights have gone out?

and what do mean by pins?


all lights out yes and pins at the back of the black block that plug in when you push it in place

[Edited on 15-11-2006 by City]


AuroraSport

 posted on 15th Nov 06 at 16:53

all the lights have gone out?

and what do mean by pins?


City

 posted on 15th Nov 06 at 16:44

hello i have just put chrome heater controls in my corsa prob is the blower does not work now?

and now lights are out?

if i bend pins slighly sometimes it works

can the unit thing be knackered?