|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Xe corsa with problems » Post Reply
|
Nic Barnes |
posted on 15th Nov 06 at 01:34 |
bored out to a 2.1? thats interesting indeed. what size pistons does it need to get to a 2.1? | |
Poot |
posted on 14th Nov 06 at 22:03 |
quote: This is what happened to me, only it was the end of the shaft which sheard off, not the clip :| | |
shane2corsa |
posted on 14th Nov 06 at 21:19 |
quote: what the hell am i on about :lol: you just said that! :lol: | |
shane2corsa |
posted on 14th Nov 06 at 21:11 |
quote: yes there is, goes right on the very end of the spline in a groove, it could have snapped and fell off. :( | |
Gregor |
posted on 14th Nov 06 at 18:59 |
The reason that I suspect my driveshaft came out was what Dave A suggested to me - gearbox oil seal may not be sitting in properly. | |
ewee870 |
posted on 14th Nov 06 at 13:00 |
As for the 2.1, bin bored out. | |
ewee870 |
posted on 14th Nov 06 at 13:00 |
Had a new inner c.v with a new clip, Drive shafts are m-tech ones with calibra inna and outers! | |
Iain M |
posted on 14th Nov 06 at 10:09 |
sound like nova driveshafts to be | |
p16vlv |
posted on 14th Nov 06 at 07:10 |
what driveshafts are they. | |
Nic Barnes |
posted on 13th Nov 06 at 23:14 |
a 2.1???? | |
ewee870 |
posted on 13th Nov 06 at 21:05 |
Got a 2.1lt corsa, every time I put my foot down it throws the inner c.v joint out of the box!!! Any ideas on what it could be? Changed the inner c.v joint still doing it! could it be that im to low, as its on coilovers? Running f16 if that matters?:( Could the diff be f***ed in the box?:o |