|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » 1.2 16v - 1.6 16v » Post Reply
|
Dave A |
posted on 18th Sep 06 at 11:26 |
rob, thanks for that, now got 20 u2u's in a few hours:lol: | |
Dave A |
posted on 18th Sep 06 at 11:24 |
quote: right, for that im not going to even try and look for a cam belt cover for you:mad: | |
allza |
posted on 18th Sep 06 at 06:35 |
Thanks for the help | |
Robin |
posted on 17th Sep 06 at 22:07 |
and a dedicated guide, just what you're looking for, right here - | |
ed |
posted on 17th Sep 06 at 22:01 |
There is an engine conversion FAQ in the FAQ section of this site. Funnily enough. | |
pallen |
posted on 17th Sep 06 at 20:58 |
ive just done it.go to smallblocksxe.com for most the info. if you need any more info just u2u me. its not to big a job to do butive been a mechanic for years so just ask and il do my bes to help | |
Gregor |
posted on 17th Sep 06 at 19:55 |
Don't do it just buy a 1.6 corsa | |
RobHayes |
posted on 17th Sep 06 at 19:52 |
- driveshafts are the same | |
Dave A |
posted on 17th Sep 06 at 19:36 |
been asked a million times, use the search function. you will find everything you need to know | |
allza |
posted on 17th Sep 06 at 13:40 |
Was just wanting a bit of advice on upgrading to a x16xe from an x12xe. Are the driveshafts the same on these two engines and engine and gearbox mounts? Or will i need these from the donor car? Also is there anything else that i will need apart from loom and manifolds. Herard somethhind about a transponder key? Any advice appreciated. Thanks |