|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » brake master cylinder » Post Reply
|
j7 gkk |
posted on 16th Sep 06 at 00:26 |
where do i get some braided hoses from u checked the tununig website but couldnt find any, cheers | |
j7 gkk |
posted on 15th Sep 06 at 11:29 |
thanx for that matey, will get breaks bled this weekend, with a bit of assistance, wil get the vaccuum checked too | |
Dave A |
posted on 15th Sep 06 at 07:33 |
bleed the brakes using a hydrolic bleeding system and fit some braided hoses. the hissing could be a vaccuum leak from the inlet manifold on the eingine to the servo, get it checked asap. | |
j7 gkk |
posted on 15th Sep 06 at 00:20 |
thanx for the help matey, much appriciated will lok into getting some braided hoses | |
Robin |
posted on 15th Sep 06 at 00:10 |
er, braided hoses, off the top of my head http://www.tuning.co.uk | |
j7 gkk |
posted on 15th Sep 06 at 00:07 |
also forgot to say now and then from inside the car you can hear a hissing noise when you press the break pedal but when i take it to the garage it never does it | |
j7 gkk |
posted on 15th Sep 06 at 00:06 |
ive had the car about 4 months and havent even looked at the brakes :o i didnt think about fitting braided hoses until you mentioned it, where do i get these from? do they make a difference? thanx matey :thumbs: | |
Robin |
posted on 15th Sep 06 at 00:03 |
are you fitting braided hoses at the same time? and when was the last time the system was bled? | |
j7 gkk |
posted on 14th Sep 06 at 23:59 |
just wanting some info, i have a set of 2.0 calipers for my 1.4 sport, but at the minute the breaks are really spongey, will i have to replace the master cylinder to compensate for this before fitting the 2.0 calipers? or is there any other symptons for this? |