|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » fitting 1 piece rear seat » Post Reply
|
scottc1088 |
posted on 8th Sep 06 at 18:01 |
just had a proper look in the daylight as i was doing it in the dark last night. | |
Robin |
posted on 8th Sep 06 at 16:47 |
the 1 piece rear seat WILL fit with the outer brackets from the split one. just unbolt the middle bracket, and bin it, then bolt the split rear side brackets to the 1 piece bench, and its sorted. | |
willhouse |
posted on 8th Sep 06 at 16:10 |
possibly, its worth a try, you should as i say be able to unclip all the material and it comes off, its all easy to take apart and put back together, | |
scottc1088 |
posted on 8th Sep 06 at 15:55 |
would the gsi material fit over my split fold seats then i could just fold them together | |
willhouse |
posted on 8th Sep 06 at 11:25 |
read too quickly then, thought was converting from a single seat to a split. | |
AK |
posted on 8th Sep 06 at 09:13 |
er.... | |
willhouse |
posted on 8th Sep 06 at 08:04 |
take the sponge and material off the gsi seats. it all unclips properly so keep the scissors well out of the way. then mount it on the the single metal back piece off your original seat, will take a bit of stretching in areas so you might need help but it definitely works and just looks like a split seat in the end. | |
scottc1088 |
posted on 7th Sep 06 at 21:04 |
iv jsut got my gsi interior and fitted the front seats but the rears are different, my old ones are split fold but the new one is in 1 piece. |