|
|
|
Not logged in [Login - Register] |
 |
You Are Not Registered Or Not Logged In |
|  |
|
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Changed 20xe head now won't start...? » Post Reply
|
| the_legend_of_yrag |
posted on 11th Aug 06 at 16:24 |
turned the part inside the dizzy a few times and kept trying till i got it right and it started. | |
| Adam_B |
posted on 11th Aug 06 at 16:13 |
tapping is normal, lifters just need to get some oil in them, as is smokey manifold, you will have touched it with oily hands when it was off. | |
| willay |
posted on 11th Aug 06 at 16:08 |
what did you do to get it started | |
| the_legend_of_yrag |
posted on 11th Aug 06 at 16:08 |
it started!! Sounds rather tappy though, and smoke pouring off the manifold? hasn't been started for over a month. | |
| the_legend_of_yrag |
posted on 11th Aug 06 at 15:49 |
the sensor on the dizzy? yeah thats at the front! | |
| lee mitchell |
posted on 11th Aug 06 at 15:46 |
the hall effect sensor should be at the front by the slam panel. but its the pulleys that are gonna be out 180o | |
| the_legend_of_yrag |
posted on 11th Aug 06 at 15:38 |
more than likely then, as when i put the dizzy back on i had to twist it to line the bolt holes up | |
| Adam_B |
posted on 11th Aug 06 at 15:35 |
yes | |
| lee mitchell |
posted on 11th Aug 06 at 15:33 |
quote: easy mistake to make that aint it ;) | |
| Adam_B |
posted on 11th Aug 06 at 15:22 |
timing right? if its 180 deg out it will turn over ok but wont fire. | |
| the_legend_of_yrag |
posted on 11th Aug 06 at 15:19 |
Ive swapped the head on my 20xe over for a rebuilt ported polished one, got everything connected back up etc, but it won't start it'l just crank over! |