|
|
mattievRS
|
posted on 7th Jun 06 at 18:49 |
quote:
Originally posted by Rileysport
you want a decent gauge cable there, sure it hasn't shorted?
Agreed you need a guage wire that can take 12v minimum and have you checked to see if the ignition earth is ok cause if its loose or damaged it will cause the +ve to overload and fry itself!!:o
|
Rileysport
|
posted on 7th Jun 06 at 07:53 |
you want a decent gauge cable there, sure it hasn't shorted?
|
willay
|
posted on 7th Jun 06 at 06:42 |
I havent got the anwser to your question, but what I did with my live I belive is fed it into the cabin through the drivers side loom hole and wired it up there to a ign live!
|
Greg_M
|
posted on 7th Jun 06 at 06:08 |
I managed to fry my ignition live on the way back from PVS, the wire just burnt itself out. Dostny seem to have done too much damaged, only to a few of the surounding wire.
Will this have been due to the wire being thin guage as it the live from the 12v?
Or are there any other likly causes?
|
