|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Cav LSi 256/20mm discs/pads on Astra GTE 2.0 16v calipers? » Post Reply
|
ainsley_brader |
posted on 15th May 06 at 19:20 |
only about £60 plus vat for the set from vauxhall for genuine ones | |
abdus |
posted on 15th May 06 at 18:17 |
well, what are they? | |
fragpot |
posted on 15th May 06 at 18:16 |
I supply brake discs and pads but you might be able to source them locally for cheaper as postage is like a tenner :( | |
abdus |
posted on 15th May 06 at 18:15 |
ok | |
fragpot |
posted on 15th May 06 at 18:13 |
Your only talking £20 for 2 QH 256x24mm discs. No point in trying to scaff it out and get 20mm thick ones because your brakes wont work properly, if at all. | |
abdus |
posted on 15th May 06 at 18:12 |
oh thnx all...:thumbs: | |
fragpot |
posted on 15th May 06 at 18:11 |
yeah | |
abdus |
posted on 15th May 06 at 18:08 |
so it should be 24mm thick? | |
fragpot |
posted on 15th May 06 at 18:07 |
they will fit but they wont work properly. | |
abdus |
posted on 15th May 06 at 17:36 |
anybody else: | |
ryan_fowler1985 |
posted on 15th May 06 at 11:06 |
you will need the 256mm 24mm discs as they are wider. these will match the calipers you have. | |
abdus |
posted on 15th May 06 at 10:55 |
quote: the discs i am getting are these: 4 stud, 256mm, 20mm, standard Cav 1.8 Lsi discs, vented mintex pads and 'quinton whatever' discs I already have 2.0 16v Astra GTE brake calipers car Corsa 1.4 16v yr2000 Will these fit together? does the discs thickness make any difference? [Edited on 15-05-2006 by abdus] | |
ryan_fowler1985 |
posted on 15th May 06 at 10:52 |
quote: what model corsa is it? the 1.4 16v had the same discs as a cav 1.8 anyway these are 236mm vented discs discs. if you have 2.0 calipers you will need 256mm vented discs off a astra GTE, Cavalier SRI/GSI or calibra 2.0 16v these discs are also thicker than the 1.8 cav. Hope this helps | |
abdus |
posted on 15th May 06 at 10:39 |
what about bore size? | |
Marc |
posted on 15th May 06 at 09:12 |
Yeah, theyre all deciding factors. | |
abdus |
posted on 15th May 06 at 08:55 |
i guess it all depends on the the number of stud holes, thickness and size? | |
Marc |
posted on 15th May 06 at 08:50 |
I'm pretty sure they do. | |
abdus |
posted on 15th May 06 at 08:17 |
As above, front discs from a Cavalier '93 1.8LSi. |